one box, exploded walls · combs · fins drawers · floors · selectable color waves · clips
Product 01
Modular Diffuser
A diffuser wall built from plywood boxes and 3D-printed waves. Four box depths, 16 well depths, a wave pattern of your own, every part generated for print.
one panel of three, opened frame · mineral wool · fabric printed braces · cleat on the wall
Product 02
Absorber Panel
One panel for the whole room: on a wall, as a ceiling cloud, across a wall–ceiling edge, in front of a corner trap or on the floor. Up to 1200 mm, joined into any size; on a wall it hangs on a cleat and lifts off.
half-round, between the diffusers, opened fabric · reflective sheet mineral wool · cage and caps
Product 03
Tube Trap
A column of mineral wool round a wooden cage, half of it reflective. Round, it stands anywhere in the room; half-round, it stands against the wall between the diffusers.
rear wall, pulled apart diffusers · cable box · bass traps corner traps at both ends
Product 10
Room Planner
The whole system in your room: diffusers, bass traps, cable boxes, corner traps and absorbers, each one alone and every combination, placed for the room you enter.
the panels where the walls meet the ceiling: hybrid (wool in front, a sealed membrane trap behind, tuned to one room mode) or wool only
08
Hybrid Edge Panel
A panel across the wall–ceiling edge. Hybrid: a membrane behind its wool, the wall and the ceiling close the air behind it, tuned to one room mode. Or wool only.
size 400–900 across, 300–1200 mm long, any number
type hybrid (tuned) or wool only
tuning mass sheet found for the mode you pick
mounted Shark-Tooth Mount; rubber seal, end plates, silicone
range about 40–120 Hz, plus the wool from the mids up (calculated)
A big panel across the corner of two walls and the ceiling, closing on the edge panels and the corner bass trap. Hybrid: a sealed membrane trap behind its wool, the corner of the room is the box. Or wool only.
size follows the edge panels and the trap next to it
type hybrid (tuned) or wool only
tuning mass sheet found for the mode you pick
mounted Shark-Tooth Mount (the corner version in design)
range about 30–65 Hz, plus the wool from the mids up (calculated)
your room with the whole system, the jigs for building it, and the mount for the edge panels
10
Room Planner
The whole acoustic system in your room. Enter the room and where you sit, and every part is placed for you; or look at each product and every combination on its own.
input room size, listening position, speakers
output 3D plan, product list, positions
system every product and combination, alone and together, with the ceiling edges and corners
Holds a panel across the wall–ceiling edge on both long edges, and lets it seal. Printed teeth on the ceiling, the wall and the panel, printed rods through them; at the bottom it is also a hinge.
fits edge panels 400–1200 long, 400–900 across, wool 60–200 mm
sized teeth, screws, rods and joints from the panel's weight and your wall